What is Melamine Polishing?

Melamine Polishing is the most common and recommended finish. Melamine polish is an organic chemical that is frequently mixed with formaldehyde to generate melamine resin, a fire-resistant, and heat-tolerant synthetic polymer. Resin is a versatile substance with a well-defined structure.

Melamine Polish

The melamine polish dries in 20 minutes.  Melamine polish is mainly used in India.  After application, the coated wood panel or surface has a more glossy look than a matt finish. As a result, the wood polish combination must be utilized within 8 hours.

Melamine polish is a closed pore polish, which means it seals the pores of the wood, making it non-breathable and protecting it from hot and cold surfaces. Melamine polish is made up of a thin resin that when applied to a wood surface generates a thin film-like layer.

Know more: Melamine Polish vs P.U Polish: What’s the Difference?

Process Of Melamine Polishing

Step 1: Sanding

Sanding Wood

Sanding is the first and most important stage in the polishing process. It is critical for each part of the furniture’s surface. Use the sandpaper after the completion of the furniture process, Because it is the first step to do. This sandpaper aids in the smoothing of the wood’s fibrous surface and rough edges.

Step 2: Stuffing 

Wood Stuffing

It’s now time to fill in the little open pores, cut surfaces, and other gaps created during the furniture-making process. There are many brands available in the market for wood coating fillers. Apply it to the joints of the furniture because it is an important step. Then fill on the small holes and the location where nails are used for fitting, holes and gaps.

Step 3: Sanding Sealing

Melamine Spray Painting

Sanding sealer is an important part of the melamine polishing process. However, sanding is necessary once more before application. When the fillers are dry, use sandpaper with smaller grains to make the surface smoother. Apply the sealer with a spray gun connected to the compressor while applying melamine polish. It should be done on every part of the furniture because it is a critical process. It creates a protective coating over the woods while also enhancing the final melamine polish appearance.

Step 4: Adding Color

Add colour on Wood

when the furniture is colour-matched to your décor, it became a part of your house. Choose your favourites colours for your wooden furniture, and Painting Drive will match them perfectly. Create a faux wood-like fibre with a chemical compound to give it a natural wood texture. Only for those made of Medium-Density Fiberboard (MDF). otherwise, skip this step. Rosewood, walnut, charcoal, and natural are some of the most popular colours right now. To colour the furniture, use a regular paintbrush or a paint spray.

Step 5: Coating of Melamine

Coating Melamine Polish

The coating application of the melamine polish is the final stage in this entire process. If you’re unfamiliar with melamine polish, it’s made up of two components: resin and catalyst (hardener), and if you want to learn more about the distinctions between Melamine and PU polishing, see our latest blog. within 8 hours of preparation, it must be used. mixed it properly to get the perfect coating substance. Using a spray gun attached to the compressor machine. Leave the spray process to professionals since it is one of the most critical duties in the entire procedure. 

Read more: Melamine polish vs PU polish: Which is best for Kitchen Cabinets?

Step 6: Add Final Finish

Final Melamine Polish finish

However, wait for the coat to dry before proceeding. Once it has dried then, sand the surface with waterproof sanding paper which contains extremely fine granules on it. When the initial melamine coating is complete, the surface turns out a little rougher, so this step smooths it out. After the initial melamine coating, the surface becomes a little rougher, so this step smooths it out. Use the spray gun and apply the final coat, same as the first coat.

Features/ Benefits of Melamine Polishing  

• Longevity — lasts significantly longer than traditional French polish.
• Crystal retention – Provides excellent glass retention, ensuring that your furniture remains gleaming for years to come.
• Resistance — Scratch, stain, and heat resistance.
• Protection — preserves the furniture from regular wear and tear on the inside as well.

If you choose to polish your wood, give us a call since we have the best Wood Polishing and Metal Polishing quotation on the market. We learn about our customers’ likes and dislikes, to create a budget best for our customers.

We hope you found this knowledge useful and that you enjoyed reading it. Keep an eye on the new and exciting stuff! I wish you and your families a wonderful day & Healthy life.

Read More for Painting & Polishing Ideas.